Amaco Magic FlowGlazes (MF Series)

Cone 05.
Magic Flow glazes are a special series which imitates the effect of Cone 10 reduction ash glazes. The advantages are in the fact that they are fired only to Cone 05 in an electric kiln in oxidation, avoiding the use of toxic ingredients and the requirement of high temperature firing.

The clay on which AMACO® Magic Flow glazes are applied affects the unique wiggly flow of these glazes. For best results use a Talc containing clay such as Mile Hi Ceramics Willow.

You can also get excellent results on slip cast items. On non-talc clay bodies the wiggly effects will not show as prominently but will smooth out and flow more in a straight line. Both effects can be very attractive.

Best application is by brushing so you can taper down towards the bottom of the piece. Apply two coats all the way to the bottom of the piece and the third coat only to the upper half.

Fire with a dry foot on a kiln shelf that has been well coated with Kiln Shelf Wash. Use stilts until you get used to how the glaze flows.

All colors in the Magic Flow series are LEAD FREE.
CL glazes restricted from use K-6 (ASTM D-4236/LHAMA)

Magic Flow glazes are supplied in liquid, ready-to-use form in pint jars. 

This line is currently available by special order through Mile Hi Ceramics.

Amaco Magic Flow Glaze Color Chart -colors shown are close representations

AP Non-Toxic conforms to ASTM D-4236
MF-20 Dark Blue	MF-30 Brown	MF-44 Chartreuse	MF-46 Olive	MF-66 Burnt Orange
Lead Free Glazes, restricted from K-6 (ASTM D-4236/LHAMA)
MF-40 Dark Green

To download a copy of the AP (Non-Toxic) colors MSDS sheet in PDF format, please click here.
To download a copy of the CL (cautions required) colors MSDS sheet in PDF format, please click here.

Directory of Amaco glazes, underglazes and specialty products for your ceramic masterpiece.