Amaco Artist Choice Glazes (A Series) -Cone 05
All colors in the Artist's Choice series are LEAD FREE.
CL glazes restricted from use K-6 (ASTM D-4236/LHAMA)

These special effects glazes imitate the Artist/Potter's favorites. They are Cone 05 oxidation glazes that look like high fired reduction stoneware. Effects like Tommoku, Rutile, Oil Spot, and other reduction surfaces are achieved without the cost or trouble of high fire reduction. They can be fired over any earthenware clay, however they look best over dark or red firing clay like Mile Hi's Red Rock Red or S-Red. The color in the clay will partially show through the texture and add another color dimension to the glaze. These glazes will look completely different depending on the clay they are applied on.

AMACO Artist's Choice glazes are available in liquid form in pint jars.

Apply over a mature Cone 04 bisque. Better results are achieved when red clay is fired one or more cones higher than the glaze firing.

For glazes A-24 Exotic Blue and A-40 Seafoam Green glaze fire slowly and add a 20 minutes hold at the end of the firing. The other glazes in the series will work well whether they are fired fast or slow. 

This line is currently available by special order through Mile Hi Ceramics.


Amaco Artist Choice Glaze Color Chart -colors shown are close representations

AP Non-Toxic conforms to ASTM D-4236
A-24 Exotic Blue	A-28 Peacock	A-34 Sand Bar	A-43 Green Float	A-52 Old Brick
A-61 Moss Brown	A-62 Camel	A-66 Burnt Orange
Lead Free Glazes, restricted from K-6 (ASTM D-4236/LHAMA)
A-22 Burnt Orange	A-32 Iron Saturate	A-40 Seafoam Green

To download a copy of the AP (Non-Toxic) colors MSDS sheet in PDF format, please click here.
To download a copy of the CL (cautions required) colors MSDS sheet in PDF format, please click here.

Directory of Amaco glazes, underglazes and specialty products for your ceramic masterpiece.